ESA VT130W, Hardware Manual, Page: 135 / 976

405.1200.037.2 - Rel.: 2.21 of 25/02/2008
8-17
Lf is the equivalent of , Rt is the equivalent of , Up of , Dw of
; using you quit the display, while with the settings are con-
firmed and you return to the project page.
Possible error messages that can be displayed on the appropriate line are:
• PR ERR
Problem-> Errors have been detected in the data exchange between
the VT and the Device.
Solution-> Check the cable; there may be disturbance.
• COM BROKEN
Problem-> Communication between VT and Device interrupted.
Solution-> Check the serial connection cable.
An error message followed by [*] indicates that the error is not currently
present but was and has since disappeared.
Example: COM BROKEN*
By pressing you pass back to the project page.
Adjusting the
contrast on
the display
To improve the quality of the representation on the display it may be neces-
sary to adjust its contrast. This can be done by rotating the trimmer (C) at
the back of the VT (see Page 8-11); turn it (using a small screwdriver or a
trimmer tool) in one direction and, if the display quality worsens, turn it the
other way.
Time Date
hh:mm:ss dd/mm/yy
Lf/Rt/Up/Dw = change
Esc=Prj Enter=Memo
PgUp
PgDn
Esc
Clr
Enter
Esc
Clr