background image

405.1200.037.2 - Rel.: 2.21 of 25/02/2008

37-29

VT575W - 
VT580W - 
VT585W - 
VT585WB 
alarms

The page has the following format:

• Numeric identification of the ISA-1A alarm.
• Four rows of 70 characters of x1 dimension or alternatively two rows of 

35 double-size (x2) characters for the message text.

• One row for any data field (which in that particular situation could indi-

cate a safety or warning limit value).

• One row starting with the character [

>]

 for the date and time of the 

appearance of the event (Event in).

• One row starting with:

• the character [

#]

 for the date and time of the Event acknowledged 

but still present.

•  the character [

<]

 for the date and time of the Event out but not 

acknowledged.

• Graphic indication of the status of the alarm:

• Event in and not acknowledged [

]

• Event in, present and acknowledged [

]

• Event out and not acknowledged. [

]

Example with three alarms:

HELP

1600

Third
alarm

ESC

When you press [ ] the second page appears.

HIST

>01-07-1998 12:28p
#01-07-1998 12:29p

0006

Temperature

over the

safe lim.

Summary of Contents for VT130W

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews: