7
12 VDC Input
- This is where you connect the supplied AC Power Adapter to charge the
battery.
Use only the adapter supplied with your unit or one approved by ErosTek.
Early
ET312s came with a 12VDC
unregulated
adapter that had a fixed input voltage — 120
VAC in the USA and 240 VAC in EU and other countries — and a variable output voltage
which depended on the load applied. The newest ET312s ship with a worldwide universal
AC adapter that provides a
regulated
output of 15VDC and comes with different AC plugs
to connect to most power outlets. In either case, an output having a center positive (+)
polarity with 500mA rating is required for connection to the ET312.
Connecting a higher
output voltage or one with the wrong polarity will most likely damage the charging circuit
inside the ET312.
Output A & B
- The output jacks are labeled “A-Out-B” and each operates independently.
Most erotic accessories will either plug right into these jacks or can be used with the
supplied banana plug cables. If you want to use TENS style pads, or certain other
electrodes, we stock a range of cables, adapters and accessories on our online shop. You
can also purchase 3.5mm (1/8”) 2 conductor (mono) plugs and cables at your ErosTek
dealer or local electronics store.
Always make connections with the ET312 turned OFF.
Audio Input
- Using the supplied stereo cable, you can connect most any audio device
with a headphone jack to this input. Some common audio sources include portable music
players, smartphones, the sound output from a computer or “sound and light” relaxation
devices. You may want to use a widely-available “Y” cable allowing you to connect both the
ET312 and your headphones to the audio device.
Disconnect audio devices when you are
not using them.
Audio devices should only be used in the audio modes.
Microphone Input
- Connect the supplied microphone to this input for creative audio
stimulation. Other microphones may also be used. See
Advanced Topics
section A5 for
more information.
Link Connector
- This is a proprietary digital interface that serves multiple purposes.
First, it allows the ET312 to be connected to a personal computer running ErosLink™
software (see section A6). The cable and software are available separately. Second, it
allows two ET312 units to be connected together in a master slave configuration. The
slave unit will “mirror” what the master unit is doing providing four channels of stimulation
controlled from one unit. Linking two units requires an inexpensive optional
Link Cable
available from our online shop, or you can fabricate your own — see Section A2.
IMPORTANT!
—
Make certain you never connect an audio device, computer, or
microphone, to the A or B Output jacks!
While this will not harm the ET312, it can easily
damage the external equipment. Unfortunately, the erotic e-stim industry standardized
on a common audio connector for their accessories. This makes it easy to plug things
into the wrong jacks and subject external equipment to the e-stim signals.
Always make
connections with the power turned OFF.
Connections