erlab Captair Smart 321, User Manual

Page: 27 / 39

27
User Manual
Replacing the filters
Your device is equipped with FLEX™ filter technology that was configured to the user’s protection needs when the device
was purchased. The configuration of the filter column is dependent on the applications carried out in the enclosure. These
applications may change over time. Your FLEX™ filter technology can therefore be reconfigured if your fume hood is used
for applications other than those anticipated when the device is first set up. If so, please contact us so that we can verify that
the current configuration is safe or it needs to be configured.
The table below summarises all possible Flex™ filter technology configurations for your device
Captair 321 - 391 - 481 Smart models
Molecular filter HEPA filter H14 / ULPA Pre-filter
Column
Configuration
1C x1 x1
2C x2 x1
1 P x1 x1
2 P x2 x1
1P 1C x1 x1 x1
1P 2C x2 x1 x1
1C 1P x1 x1 x1
2C 1P x2 x1 x1
1P 1C 1P x1 x2 x1
Optional Standard
Captair 392 - 483 - 633 - 714 Smart models
Molecular filter HEPA filter H14 / ULPA Pre-filtre
Models 392 483 633 714 392 483 633 714 392 483 633 714
Column
Configuration
1C x2 x3 x3 x4 x2 x3 x3 x4
2C x4 x6 x6 x8 x2 x3 x3 x4
1 P x2 x3 x3 x4 x2 x3 x3 x4
2 P x4 x6 x6 x8 x2 x3 x3 x4
1P 1C x2 x3 x3 x4 x2 x3 x3 x4 x2 x3 x3 x4
1P 2C x4 x6 x6 x8 x2 x3 x3 x4 x2 x3 x3 x4
1C 1P x2 x3 x3 x4 x2 x3 x3 x4 x2 x3 x3 x4
2C 1P x4 x6 x6 x8 x2 x3 x3 x4 x2 x3 x3 x4
1P 1C 1P x2 x3 x3 x4 x4 x6 x6 x8 x2 x3 x3 x4
UP
Air
Flow
Fan module
#1