17
R290 User’s Guide
To “Mute” or “Unmute” the Microphone
Press the
SOFT RIGHT
key during the call to ‘mute’ or ‘unmute’ the
microphone. When muting is on, the earpiece and alerter is still active
together with the In-call Menu, stores and scratch-pad.
Using Phone as Scratch Pad
1. Enter a phone number on the keypad while talking. When you end the
call, the number remains in the display.
2. Press
YES
to call the number shown in the display.
3. Hold
MEM
button to store the number shown.
Sending Tone Signals
During a call you can press keys 0 – 9, * and # to send DTMF tones, (for
example, to perform banking by phone or to control an answering
machine). See “Sending DTMF Tones During a Call” on page 25
Checking Time or Cost of Calls
When you start a call (incoming or outgoing), the airtime is counted in
minutes and seconds. If you want the phone to keep track of the cost, first
check if your service provider supports that service. If the service is
available for your subscription, see “Call Duration and Cost” on page 26.
For the call duration and cost, the display will show:
For the total call duration and cost, the display will show:
The bottom line shows the call cost, and the duration is shown above it.
To Change the Ring Volume
Press the up or down key on the side of the phone while the phone is
ringing before accepting an incoming call. The volume level will be
indicated by the amount of squares shown on the display.
You can also change the ring volume from the Ring Tone Menu; refer to
“Personalizing Your Phone” on page 30.
Summary of Contents for R290SAT
Page 11: ...3 R290 User s Guide The Phone ...
