Ericsson R290SAT User Manual Download Page 55

Page: 55 / 71

R290 User’s Guide

The bottom line of the display shows the state of the call, this is either
‘

Connected’, ‘On Hold’, ‘Call Held’

‘Hung Up’.

If ‘

On Hold’

displayed, the remote party has placed the call on hold. If

‘Hung Up

’

displayed, the remote party has hung up and the network has not
terminated the call but suspended it instead.

You can scroll through the call list using the

SOFT

keys, and review the

details for each participant in turn. If you hold a

SOFT

key down for at

least half a second, you will automatically scroll through the list.

To Extract a Participant in a Conference Call for a
Private Conversation

To enter the Conference Menu, if the conference call is the only call and
there are no held calls.

1. Press

SOFT LEFT, 5, 2

. The display will show the call list.

2. Scroll the call list using the

SOFT

keys. When the call you wish to

extract is displayed. Press

SOFT LEFT

. An example of what the

display will be is:

3. Press

YES

and the call will be extracted for a private conversation.

The display will return to the Normal In-Call display. Alternatively,
press

SOFT RIGHT

to abort the extraction at any stage.

4. To abort the extraction operation, press

. The phone will return to

the Call list.

If the conference call has been put on hold, you will not be able to extract
a call from it.

The extraction operation also cannot be performed if a call has already
been put on hold, the message ‘

Call Already On Hold’

will be displayed

before returning to the Normal In-Call display.

If you have extracted a call from a conference call, it can be added to the
conference call again by selecting

YES

from the Conference Menu.

To Disconnect a Remote Party from a Conference Call

1. Press

SOFT LEFT

. The display will be:

2. Press the

SOFT

keys to scroll to the call you wish to disconnect, then

press

YES

. The display will show:

3. To disconnect the call, press

YES,

to abort the operation press

and return to the Call List.

If no remote parties remain when the call is disconnected, the conference
call will end.

Call Hold and Call Termination by a Remote Party

If, during a conference call, one of the remote parties either puts their call
on hold or terminates it, the phone will inform you of these actions.

If a remote party places their call on hold, the message displayed will
alternate between ‘

Conference’

and ‘

On Hold’

. You can use the Call

Summary of Contents for R290SAT








































































Search results

Summary of Contents for R290SAT

Reviews:

Ericsson R290SAT, User Manual, Page: 55 / 71

Search results

Summary of Contents for R290SAT

Reviews: