Ericsson R290SAT User Manual Download | Manualshive

Page: 51 / 71

background image

43

R290 User’s Guide

5. Select the basic service group for which the call diversion is to be

cancelled. The display will show:

6. Press

1

for All Calls,

2

for Voice Only,

3

for Data Only or

4

for Fax

Only.

7. The display will show the message ‘

Please Wait

’ and then ‘

Request

Accepted

’ will be displayed. The RADIO PATH

ACKNOWLEDGEMENT TONE will be played through the
earpiece. The phone will then return to the standby display.

Call Waiting

Call Wait is a network subscription option which allows an incoming call
to be held waiting when you are already in a call. If this option is not
available or not activated, new calls trying to reach you when you are
busy will be rejected and there will be no notification that you were being
called.

Call Hold is a network subscription option that allows a call to be placed
on hold when accepting a waiting call, or to start a new outgoing call. If
the network allows, the party being placed on hold may be sent
notification that their call is being put on hold. The notifications may be
an audible announcement and the message

‘On hold’

will be displayed on

the screen. The calling party may also be sent notification when the call
becomes active again.

You can retrieve a call from hold if the active call has ended or the active
and held calls are switched.

Only a voice call or voice calls may be placed on hold.

To Check the Call Wait Status

1. Press

SOFT LEFT

,

5

to enter Advanced menu.

2. Press

2

for Call Wait menu.

3. Press

1

for Status.

One of the following messages will appear:

All Call Wait Services Activated
Data Call Wait Activated
All Call Wait Services Inactive
Data Call Wait Not Activated
Voice Call Wait Activated
Fax Call Wait Activated
Voice Call Wait Not Activated
Fax Call Wait Not Activated

There may be a short delay before the network responds to the status
request, this will be indicated by the message ‘

Please Wait

’ being shown

on the display.

If there is one response then this will be displayed for 4 seconds before
the phone returns to standby. If there is more than one response then the
up and down arrows will be displayed to scroll the responses. Press

NO

to return to standby.

To Set Call Waiting

1. Press

SOFT LEFT

,

5

to enter Advanced menu.

2. Press

2

for Call Wait menu.

«
...
49
50
51
52
53
...
»

Summary of Contents for R290SAT








































































Reviews:

No comments

Related manuals for R290SAT

Brand: Audiovox Pages: 79

Brand: Xblue Networks Pages: 98

Brand: Yealink Pages: 8

Brand: Yealink Pages: 38

Brand: Panasonic Pages: 129

Brand: Archos Pages: 45

Brand: ATCOM Pages: 9

StarPoint 500 Entry

Brand: 2N Pages: 59

Brand: Yealink Pages: 143

Brand: SoftBank Pages: 36

Brand: Ericsson Pages: 76

Brand: HTC Pages: 226

Brand: Avaya Pages: 32

Brand: UNITe IP Pages: 116

Brand: HTC Pages: 139

Brand: Aquos Pages: 186

Brand: switel Pages: 4

Brand: Asus Pages: 92

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands