25
R290 User’s Guide
Discrete presses of
SOFT RIGHT
will scroll through the list of received
numbers.
The Missed Store
The Last Number Missed store holds up to ten numbers. When the Missed
store is active, the last number can be recalled by pressing
SOFT
RIGHT
. The display will be:
Discrete presses of
SOFT RIGHT
will scroll through the list of missed
numbers.
Last Number Redial
If you press the
YES
key in standby when no number is on the display,
the last number dialled will be recalled and dialled. The call is treated in
the same as when dialling a normal number.
Pause Dialling
To enter a PAUSE character in a dialled number from standby, type in a
normal telephone number. Enter a PAUSE character by pressing the
#
key twice and the ‘PAUSE’ symbol will appear as a filled in block (
+
).
The digits that you add after the PAUSE will be transmitted as DTMF
tones across the network. For example:
You can send the number in the usual manner, or store, dial or edit it, or
clear the number from the display. You can also recall the number from
the phone book stores.
If you dial the number, when the DTMF tones are signalled over the
network
they are echoed through the earpiece so that you can hear
what is happening
. You can terminate the call as normal.
You may enter any number of PAUSES into a number. The number must
not exceed 60 characters not including the international prefix.
Sending DTMF Tones During a Call
You can generate DTMF tones manually while a call is in progress. This
facility can be enabled/disabled from the Call Set-up Menu by selecting
5
followed by
YES
. The display will be:
To enable the DTMF tones press
1
or
YES
. To disable them, press
2
. A
confirmation message will be displayed before the phone returns to the
Call Setup Menu.
Summary of Contents for R290SAT
Page 11: ...3 R290 User s Guide The Phone ...
