Ericsson KH-500, Operator'S Manual, Page: 34 / 64

34
If the receive channel is Priority 1, the radio will
lock onto this channel for the duration of the
activity and no other channels will be scanned.
After the activity ceases, scanning will resume
after a pre-programmed delay.
•
PRIORITY 2, NON-PRIORITY PROGRAMMED
CHANNELS - This condition operates similar to
the above with the Priority 2 replacing the Priority 1
references.
•
PRIORITY 1, PRIORITY 2, NON-PRIORITY
PROGRAMMED CHANNELS - If the receive
channel is non-priority, the radio will sample the
Priority 1, return to the non-priority channel, then
sample the Priority 2 channel. This sampling will
continue until activity ceases on the non-priority
channel or activity is detected on either of the
Priority channels. If activity is detected on the
Priority 2 channel, the radio will lock onto that
channel but will continue to sample the Priority 1
channel for activity. Should activity be detected on
the Priority 1 channel while locked onto the Priority
2 channel, the radio will switch to the Priority 1
channel and remain there for the duration. After
activity ceases, scanning will resume after a pre-
programmed delay.