Ericsson KH-500, Operator'S Manual, Page: 30 / 64

30
If the radio was programmed to power up in the
Selective mode, changing positions on the channel
select switch will always place a Type 99
programmed channel in the Selective mode. If the
radio was programmed to power up in the Monitor
mode, changing positions on the channel select
switch will always place a Type 99 channel in the
Monitor mode.
Type 99 Selective Call Receiving and Sending
1. Select the appropriate channel to receive the Type
99 tone signal.
2. After a Type 99 call is received and the beeps
have sounded, press the PTT button and answer
the call. When the communication sequence is
completed, press the MONITOR button to reset
the radio for the next call.
3. When the radio is reset (Selective mode), Type 99
operation can be disabled by pressing and
releasing the PTT button. The PG status flag will
blink. No transmission occurs. A second press of
the PTT button will result in a normal transmission.
NOTE