Ericsson KH-500, Operator'S Manual, Page: 33 / 64

33
in the LCD display along with the corresponding status
flag, S, P1 or P2.
The scan function is now in the priority scan mode
and scanning will be determined by the following
conditions:
•
NON-PRIORITY PROGRAMMED CHANNELS -
The radio will lock on the channel until activity on
the channel ceases. The scanning will resume
after a pre-programmed time delay.
•
PRIORITY 1, NON-PRIORITY PROGRAMMED
CHANNELS - If the receive channel is non-priority,
the radio will sample the Priority 1 channel for
activity. Priority 1 channel will continue to be
sampled while remaining on the non-priority
channel until the carrier ceases and scanning
resumes after a pre-programmed delay. Should
activity be detected during a sampling of the
Priority 1 channel, the radio will switch to the
Priority 1 channel and remain there until activity
ceases on the Priority 1 channel. Once activity
ceases on the Priority 1 channel, scanning will
resume after a pre-programmed delay.