-
The radio will continue scanning if a new group is
selected when scan is on.
-
Pressing the PTT button when scan is on will cause
the radio to transmit on the displayed group or to the
currently selected group (depending on program-
ming).
SCAN Radio
Adding Groups to a Scan List
1.
Scan must be off to add/delete channels to/from the
scan list. If the scan icon
is on, press the
S
key to turn scan off.
2.
Select the desired channel using the SYS-
TEM/GROUP/CHANNEL knob and/or the
<
or
>
keys. If the selected channel is currently on the
list, pressing
A
will display the S status flag.
3.
While the status is displayed, press the
A
key to
add a group to the scan list. “S” is displayed on line
one.
4.
Press the
A
key a second time to set the group
to Priority 2. A “2” is displayed on line one.
5.
Press
A
a third time to set the group to Priority 1.
A “1” is displayed on line one. The priority level
section sequence only advances the group to the
next high priority level and stops at priority level 1.
40
Summary of Contents for EDACS PRISM HP
