Group or Channel Selection
Several methods can be used to select a new group
or channel.
METHOD 1: From knob: If group selection is pro-
grammed to the SYSTEM/GROUP/
CHANNEL knob, select a group by turning
the SYSTEM/GROUP/CHANNEL knob to
the desired group number position. The
display registers the new group name on
line two. If the knob is moved to a position
greater than the number of programmed
groups, the highest programmed group
will remain selected.
Note: If group selction is programmed to
the SYSTEM/GROUP/CHANNEL knob,
direct access to groups will not be avail-
able. Pressing the
<
or
>
will scroll
through different sets of 16 groups each
(banks) if more than 16 groups are pro-
grammed into the radio. The groups within
each bank are then selectable via the
SYSTEM/GROUP/CHANNEL knob as
described in METHOD 1.
METHOD 2: From keypad: If group selection is pro-
grammed as the primary function of
<
and
>
select a group by pressing
<
or
>
to scroll through the group
list. The display registers the new group
name on line two.
32
Summary of Contents for EDACS PRISM HP
