manualshive.com logo in svg

Ericsson EDACS PRISM HP, Operator'S Manual

Share
Download
Ericsson EDACS PRISM HP Operator'S Manual Download Page 13

grammed level of zero (displayed as
OFF in the display) up to 31 which is
the loudest level.

EMERGENCY/

HOME BUTTON

The EMERGENCY/HOME button is
used to automatically select a pre-
programmed Group/System by
pressing and holding for a pro-
grammed duration. It can also be
used to declare emergency by
pressing and holding for pro-
grammed duration. The button must
be pre-programmed for either opera-
tion, not both.

OPTION

BUTTON

Programmable per system.

CLEAR/

MONITOR

BUTTON

Serves several purposes depending
on the operating mode. In trunked
mode, the CLEAR/MONITOR button
exits the current operation and re-
moves all displays associated with it.
The radio and display then return to
the group receive state. In conven-
tional mode, pressing this button un-
mutes the receiver so activity on the
selected channel can be monitored.
When pressed and held for approxi-
mately 3 seconds, this button tog-
gles conventional channel decod-
ing/encoding (Channel Guard, Digi-
tal Channel Guard) on and off if pro-
grammed for the selected channel.

13

Summary of Contents for EDACS PRISM HP













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands