Ericsson AEGIS M-PA, Operator'S Manual

Page: 8 / 40

If programmed enabled for the selected channel,
Channel Guard (CG) and/or Type 99 (T99) signalling
will be enabled when the channel is selected. If CG
and/or T99 are enabled, the appropriate status flag
"CG" and/or "T99" will turn on. The MONITOR BUT-
TON may then be used to toggle CG and/or T99
between disabled and enabled by pressing and hold-
ing it for at least one (1) second; the appropriate
status flag will toggle on or off. The MONITOR BUT-
TON is also used to reset T99 operation after a call
is received.
EMERGENCY BUTTON
The EMERGENCY BUTTON is the small red
button located on top of the radio near the antenna.
If this button is programmed for emergency opera-
tion, pressing it for at least one (1) second will cause
the radio to transmit GE-STAR emergency signalling.
The "EMG" status flag will turn on. GE-STAR is
transmitted according to one of several different pro-
grammable methods. See EMERGENCY OPERA-
TION for details.
This button may also be programmed as an home
mode button. If programmed in this manner, pressing
it will switch operation to the programmed home
mode.
MENU BUTTON (Scan and System Models)
Pressing the MENU button causes the radio to
scroll through up to seven (7) different menus pro-
grammed into the radio. After the desired menu is
displayed, the feature within the menu is selected
with the SEL button. The menus that may be pro-
grammed are:
Menu Display Function Or Use
"CHANNEL" The MENU and SEL buttons are
programmed for channel selec-
tion. When this display appears,
select the desired channel with
the SEL button and then press
EXIT.
"MODE" The MENU and SEL buttons are
programmed for mode selection.
When this display appears, se-
lect the desired mode by press-
ing the SEL button and then
press EXIT.
"PHONE" Allows selection of one (1) of the
ten (10) programmed or user en-
tered telephone numbers for
automatic dialling.
8