4.
To add or delete additional channels, repeat
steps 2 through 4.
5.
Press the EXIT button to return to normal
operation.
Using Scan
Toggle scan on or off by pressing SCAN. The
"SCN" status flag turns on when the radio is scan-
ning.
If programmed for dual-priority scan operation,
the priority-one, priority-two and the remaining chan-
nels will be scanned. Once a carrier is detected and
if programmed, the correct Channel Guard is de-
coded, the display will indicate the channel. Sam-
pling of the priority-one and priority-two channels will
continue. Should a priority-one or two channel car-
rier, regardless of Channel Guard, be detected while
a non-priority channel is being received, the display
name is updated, the applicable status indicator, "1"
or "2" lights, and the channel is switched to the priority
channel. Sampling of the priority-one channel will
continue if a message is being received on the prior-
ity-two channel.
If programmed for non-priority scan operation,
once a carrier is detected, and if programmed, the
correct Channel Guard is decoded, the display will
indicate the detected channel. Scanning will stop
and the radio will remain on the channel until the
carrier ceases. Scanning will then resume with the
selected channel’s name displayed.
TELEPHONE INTERCONNECT CALLS
The keypad on the radio’s front panel allows the
operator to make telephone interconnect calls on
radio systems equipped with this capability. Tele-
phone numbers may be manually dialed using the
DTMF numeric keypad, or one (1) of the ten (10)
programmed or stored numbers can be selected and
automatically dialed. In System models, each chan-
nel may be programmed for telephone interconnect
by enabling it for DTMF dial operation. Voice trans-
missions may be encrypted if the channel is pro-
grammed for private operation and the operator
selects private mode after the dial sequence is com-
pleted.
System models only - Most systems require an
"
*
" to be sent at the beginning of a transmission to
get a dial tone. Others require "#". After the dial tone
is received, the number is sent. At the completion of
23
Summary of Contents for AEGIS M-PA
Page 1: ...Operator s Manual AEGIS M PA PORTABLE RADIO LBI 38798B E...
Page 5: ...Figure 1 Aegis M PA Select Model Radio SIDE VIEW FRONT VIEW 5...
Page 6: ...Figure 2 Aegis M PA Scan Model Radio SIDE VIEW FRONT VIEW 6...
Page 7: ...Figure 3 Aegis M PA System Model Radio SIDE VIEW FRONT VIEW 7...
