"ALERT" MENU
The "ALERT" menu allows the alert tones to be
disabled or enabled. If this menu is programmed into
the radio, disable and enable the alert tones as
follows:
Disable The Alert Tones
1. If the "SCN" status flag is on, press SCAN
to turn scan off.
2. Press the MENU button until "ALERT" ap-
pears in the display.
3. Press the SEL button until "DISABLED" is
displayed.
4. To disable the tones press the EXIT button.
Enable The Alert Tones
1. Press the MENU button until "ALERT" ap-
pears in the display.
2.
Press the SEL button until "ENABLED" is
displayed.
3.
To enable the tones press the EXIT button.
OPERATING TIPS
Antenna location and condition is important
when operating a portable radio. Operating the radio
in low areas of terrain, under power lines or bridges,
inside of a vehicle or in a metal or steel framed
building can severely reduce the range of the unit.
Mountains and buildings can also reduce the range
of the unit.
In areas where transmission or reception is poor,
some improvement may be obtained by insuring that
the antenna is vertical. Moving a few yards in another
direction or moving to a higher elevation may also
improve communication. Vehicular operation can be
improved by using an externally mounted antenna.
Battery condition is another important factor in
the trouble free operation of a portable radio. Always
charge the batteries properly .
Always observe all of the Federal Communica-
tion Commission’s rules and regulations.
27
Summary of Contents for AEGIS M-PA
Page 1: ...Operator s Manual AEGIS M PA PORTABLE RADIO LBI 38798B E...
Page 5: ...Figure 1 Aegis M PA Select Model Radio SIDE VIEW FRONT VIEW 5...
Page 6: ...Figure 2 Aegis M PA Scan Model Radio SIDE VIEW FRONT VIEW 6...
Page 7: ...Figure 3 Aegis M PA System Model Radio SIDE VIEW FRONT VIEW 7...
