Ericsson AEGIS M-PA, Operator'S Manual

Page: 12 / 40

TX Transmitter enabled - On when the radio
is transmitting.
BSY BuSY - On indicates a carrier is being
received (the channel is busy). Note that
if the selected channel is programmed for
Channel Guard (CG), Digital Channel
Guard (DCG), or Type 99 (T99) tone de-
code operation, the radio may not un-
squelch if a valid tone(s) is not received;
the BSY status flag will be on.
CG Channel Guard - On indicates tone Chan-
nel Guard (CG) or Digital Channel Guard
(DCG) encode/decode is enabled on the
selected channel.
BAT BATtery low - On indicates the battery
pack’s charge is low.
S Scan list - On indicates the selected chan-
nel is on the scan list.
1 priority 1 - On indicates the selected chan-
nel is designated as the priority-one scan
channel.
2 priority 2 - On indicates the selected chan-
nel is designated as the priority-two scan
channel.
SCN SCaN mode - On indicates the radio is
scanning.
UNIVERSAL DEVICE CONNECTOR
The Universal Device Connector (UDC) is lo-
cated on the side of the radio just above the PTT and
MONITOR BUTTONS. This connector provides con-
nections for the external accessories such as a head-
set, a speaker-mike, or an emergency lanyard. When
the radio is locked in a vehicular charger/repeater the
UDC provides the audio and control connections
between the radio and the vehicular charger/re-
peater. The UDC is also used by the maintenance
personnel when the radio is programmed.
ALERT TONES
The M-PA uses alert tones or "beeps" to indicate
various operating conditions. The alert tones may be
disabled when the radio is programmed. on the Scan
and System models, The alert tones may be enabled
or disabled via the menu mode if the "ALERT" feature
is programmed. See "ALERT" MENU for details.
The remaining status flags are pro-
vided on the Scan and System models
only.
NOTE
12