10 of 12
888-24-205-G-01 rev. C • 09/12
Adjustment Step
826-463-00
WARNING
Moving Parts Can Crush And Cut
IMPACT HAZARD
1. Release hand brake and raise
worksurface to highest position.
2. Turn adjustment nuts at back of legs
counterclockwise until they stop (May
require 40-60 revolutions per leg).
To Minimize Lift Tension
Failure to heed this warning may
result in serious personal injury or
property damage!
For More information and instructions
visit www.ergotron.com or contact
Ergotron Customer Care at
1-800-888-8458
.
- Removing Mounted Equipment
- Shipping Desk or Storing Desk
Minimize Lift Tension BEFORE:
IMPORTANT! This product will need tension
adjustments once installation is complete. Make
sure all equipment is properly installed on the
product before attempting range of motion or
tension adjustments. Any time equipment is
added or changed on this product resulting in a
diff erent mounted weight, you should repeat the
adjustment steps to ensure safe and optimum
operation. This product should move smoothly
and easily through the full range of motion and
stay where you set it. If movement is diffi
cult or
the product does not stay where you set it, follow
the adjustment instructions to loosen or tighten
the tension to create a smooth, easy motion.
Depending on your product and the adjustment, it
may take many turns to notice a diff erence.
13