Operating Instruction
Spindle lifting system SLA/SLG VD
Document no.: B-00081
Edition 2019 02
Operating instruction EN
Copyright by Ergoswiss AG
10/20
3.2
Mounting of the manual control switch
3.2.1
Manual control switch VD Up / Down
1.
Position the manual control switch at the desired loca-
tion underneath the table top.
The control panel must overhang below the work
surface!
2.
Fasten the manual control switch using the mounting
screws.
Be careful not to drill through the table top!
3.2.2
Manual control switch VD / Memory
1.
Position the mounting plate underneath the table
plate.
The control panel must overhang below the work
surface!
2.
Fasten the mounting plate using the mounting
screws. Be careful not to drill through the table top!
3.
Slide the manual control switch onto the mounting
plate.
