Operating Instruction
Spindle lifting system SL/SM compact
Document no.: B-00061
Edition 2018 02
operating instruction EN
Copyright by Ergoswiss AG
9/23
Motor socket 1 (M1)
Motor socket 2 (M2)
Motor socket 3 (M3)
(S)
Socket for manual control switch
(D) Connection for safety strip of sync cable
(P) Power socket
(F)
Connection for functional grounding (e.g. ESD)
ATTENTION
Connecting homemade products to the control box is prohibited!
Only supplied components are to be used, otherwise the danger of damage or destruction of
the device can arise.
1.
Connect the motor cables to the control box. (Automatic plug detection)
2.
Connect the manual control switch to the control box.
3.
Connect the power cable to the control box.
4.
Connect power cable to the mains. (Clicking sound
ready for initial operation)
NOTE
Before connecting the power cable to the mains the following must be verified:
Does the mains voltage correspond to the value on the name plate of the control box?
Are the plugs of the motor cable connected correctly?
Is the entire lifting system assembled according to the assembly instructions?
1
2
S
D
P
F
3
Connect optional
components
