7. Step
The mounting of the sealing head is to be done in reversed order of the
dismantling. When mounting the cover „display“, take care to engage it first at
the display and then all along the groove of the storage plate.
5. Step
Pull the cable with plug through the
opening in the holder of the spiral
cable.
6. Step
Pull out the locking bolt for
unlocking the sealing head and
remove the sealing head.
Fig. 116
Fig. 115
If your strapping system is
equipped with the optional Triplex
Tool-Lift:
Remove both screws M5
(4mm Allen wrench). These screws
are secured with special wedge-lock
washers (the wedge-lock washers
can be reused).
Fig. 117
Fig. 118
-73-
rough
(inward)
tenuous
(outward)
washer 1
washer 2
tenuous
rough
tenuous
Attention!
When mounting the sealing head again
make sure that the rough tooth system
of the two wedge-lock washers are
facing each other (Fig. 118).
