7.6 Setting strap tension at the sealing head
Fig. 27
The set tension force is displayed continuously when the tool is ready for
operation.
Press „tension force“ button (2).
•
The set tension force flashes for 5 seconds.
•
The b (1) and – (3) appear.
•
Unused displays disappear.
Press + (1) or – (3) button until the required tension force is displayed.
•
The status indicator bar (4) shows the set tension force in relation to
the possible maximum value.
Save: Press „tension force“ button (2) or wait for 5 seconds.
-29-
Note!
•
Switch between display in „N“ or „lbf“: Press the flashing „tension force“
button (2) for two seconds.
•
Every time the button is pressed an acoustic signal confirms the action.
•
The tension force is displayed continuously when the tool is operational.
•
Setting soft tension (section 7.5).
