7.8 Select favourite
*
The function „favourite“ activates a second settings level, whose parameters
can be set freely like those of the main level.
This enables the operator to quickly change from one setting into the other.
-32-
•
AUTO = Fully automatic strapping*
The tensioning button has to be pulled (touched) once only. This triggers
the tensioning process. Once the set tension force has been reached, the
straps are automatically welded and the upper strap is cut off.
* This operating mode AUTO = Fully automatic strapping is factory blocked! Activation only through your
ErgoPack service partner possible.
Deactivate favourite:
•
Press „favourite“ button (1). The
star (2) changes from bold to
outlined. All parameters change
to the pre-set values of this
settings level.
Activate favourite:
•
Press „favourite“ button (1). The star
(3) changes from outlined to bold. All
parameters change to the pre-set
values of this settings level.
2
1
2
3
Fig. 28 b
Fig. 28 a
* The operating mode favourite is factory blocked! Activation only through your
ErgoPack service partner possible.
Warning!
Strap tensioning or strapping, danger of jamming and crushing
Do not place hands or other body parts between the strap and the packaged
goods during the strapping process. Ensure that there are no other persons in
the hazard zone.
For an emergency stop in the case of danger (trapped person):
To release the strap tension (before welding), pull the rocker lever. In
operating mode AUTO, also the tensioning or welding button can be pressed
again. After welding, cut the strap using a tool (strap cutter).
