1. Step:
To set the correct pallet width, press
the „Pallet width“ button in the
main menu.
2. Step:
You can choose the required width of
the pallet to be strapped among the
factory set pallet widths.
In case the required pallet width is not
listed, you can adjust one of these
buttons to the required pallet width.
For changing one of the buttons to the
required pallet width, proceed as
follows:
Press and hold the button to be
changed for approx. 3 seconds. You
can then set the required pallet width
in 10 cm steps (Fig. 55). As soon as you
confirm your setting with „OK“, this
new pallet width will be saved in the
preset pallet widths.
Your ErgoPack is now ready for strapping.
-43-
Fig. 53
Fig. 54
Fig. 55
7.11 Setting pallet width
