Ergonomic products Safe-T-Shield, Manual

Page: 8 / 28

950-104revB ergonomic products • 198 Airport Rd • Fall River, MA 02720
8
3.4 3.5 3.6
3 - COMPONENTS AND ASSEMBLY INSTRUCTIONS cont.
ACCESSING FILTERS FOR INITIAL USE (AND REPLACEMENT) - continued
4. To remove the Secondary Filter, grasp the tabs at both ends and lift straight up (fig. 3.4).
5. To remove the Main Filter Assembly, grasp the white cardboard sides and lift straight up (fig. 3.5).
6. The packing material mentioned above will be taped to the bottom of the Main Filter
Assembly upon arrival. Remove and discard this packing material prior to use (fig. 3.6).
Failure to do so may cause damage to the motor.
7. Replace filters in reverse order from which they were removed.
8. Carefully replace the black Filter Gasket on the edge of the Main Filter Assembly (do not cover
the Secondary Filter tabs). Be sure it is seated properly all the way around, otherwise suction
efficiency will be reduced.
Filters should be considered Hazardous Materials and replaced and discarded using standard
Hazmat protocols.
Always use appropriate PPE when replacing filters.
See page 21 for filter replacement schedule and information on ordering.