Ergonomic products Safe-T-Shield, Manual

Page: 13 / 28

950-104revB www.ergonomic-products.com • 866-374-6487
Safe-T-Shield
TM
- Mobile
Item T1B1
13
POWER ON/OFF
The power can be switched on using either the Remote Control or the
switch located next to the power outlet on the unit itself, as shown right.
Press power switch up (“I”) to turn unit on, and down (“O”) to turn unit off.
DISPLAY FUNCTION, SPEED SETTINGS (AIR VOLUME),
AND RUN TIME
After turning the unit on, the Display will show the last speed setting
used.
Vacuum speed may be set to a value from 1 - 10, using the buttons
on the vacuum housing shown right. (Left side button reduces speed
in increments of 1, the right side button increases it.)
After 3 minutes without any adjustments to the vacuum speed, the
display on the Housing will show a 3-digit number indicating the
cumulative runtime. Each value is equal to 5.76 million revolutions of
the fan. For example, ‘002’ = 11.52 million revolutions.
CONTROLLER FUNCTION
The Controller may be used to turn the power on and off as well as
to adjust the vacuum speed settings.
Vacuum speed (volume) is increased by turning the dial clock-wise.
The current setting is indicated by the small black dot on the dial.
Settings entered into the Remote Control will override any settings
made directly on the unit.
4 - OPERATING INSTRUCTIONS cont.
SMOKE ABSORBES CONTROL
ENTER
OFF ON
LPM
SMOKE ABSORBES CONTROL
ENTER
OFF ON
LPM