Ergonomic products Safe-T-Shield, Manual

Page: 15 / 28

950-104revB www.ergonomic-products.com • 866-374-6487
Safe-T-Shield
TM
- Mobile
Item T1B1
15
5 - POSITIONING FOR TREATMENT cont.
POSITIONING THE SHIELD ABOVE THE PATIENT
Ideal positioning may vary depending on user
preference and treatment requirements.
However, for optimal evacuation and protection from
spray and bioburden ejection, the Shield should be
located at a distance of 8” to 10” directly above the
oral cavity, and at a downward angle of approximately
20˚ as shown (fig. 5.4).
To Adjust the Height and Location of the Shield Above the Patient:
Click here for a demonstration video or go to: www.ergonomic-products.com/safe-t-shield
After positioning the base next to the patient chair as needed (see figs. 5.2 & 5.3), follow the steps
below to properly position the Shield above the patient.
1. Place your open hand on the side of the Suction Tube away from you, and approximately 6” above
the circular Handle. Place your other hand on the top of the arch formed by the Tube (fig. 5.5).
2. Use lower hand to steady and control the Suction Tube, while carefully bending the top away from
you, down, and toward the patient. Leave the Shield 12” to 15” inches above their face (fig. 5.6).
3. Move to the patient's head, place a hand on each side of the Manifold and carefully articulate the
Shield into proper position, in line with the patient and 8"-10" above the oral cavity (fig. 5.7).
8” -10”
5.4
Do not bend the Suction Tube immediately above the Handle as this may cause
undo strain on the Tube. Maintain at least 6” of straight Tubing above the Handle.
When establishing this initial “rough” position the Shield may settle, drifting
down 3”-4”. Do not attempt to achieve a final position at this time.
5.5 5.6 5.7