Ergonomic products Safe-T-Shield, Manual

Page: 22 / 28

950-104revB ergonomic products • 198 Airport Rd • Fall River, MA 02720
22
Problem or Malfunction Possible Reason Possible Solutions
The display alternately
shows “OFF” and a
rotating box image.
The air inlet
is completely
blocked.
Tun off the power and check
the air inlet for blockage.
The air inlet is just below
the Housing lid on the short
sides. Remove blockage if
present.
If no blockage is present,
remove the lid and check for
internal blockages.
If no internal blockage is
found, replace the filters.
LED window displays
“ERR”, alarm sounds
and the motors stops
working.
There is a fan or
internal power
circuit failure.
Cycle the power off and then
on again.
If the problem remains,
contact us.
9 - TROUBLESHOOTING
If a problem or malfunction occurs, please review the suggestions below.
If these do not correct the problem, discontinue using the device and contact us.
If the Suction Tube sections become uncoupled anywhere along their length (gapping, revealing the
inside of the Tube), do not attempt to reconnect them.
Discontinue use of the product and contact the manufacturer.