Ergonomic products Safe-T-Shield Manual Download Page 25

950-104revB

www.ergonomic-products.com • 866-374-6487

Safe-T-Shield

TM

 - Mobile

Item T1B1

 25

11 - WARRANTY

A PROMISE FROM THE EMPLOYEES AT ERGONOMIC PRODUCTS, INC.

At Ergonomic Products, Inc., we understand that placing a dental equipment order, whether it be with a local 

distributor, one of the big names in the industry or a specialty firm like ours, can be difficult. We understand 

your fears in making such an investment.

Whether your order is large or small, we promise to treat every customer with the same level of complete 

honesty and courtesy. We know you won’t get this kind of commitment everywhere you go.

We promise

 to give you answers to your technical questions as quickly as possible. Our technical team is 

working diligently every day to deliver the finest equipment. When a service need does occur, we will take full 

responsibility and do everything in our power to correct the problem.

We promise

 to always truthfully describe our products and the technology they provide you with. We are 

sure that our equipment is absolutely the best available. Period. We believe that it will tell it’s own story. We 

will never sell you more than our equipment can deliver. Life is too short for that.

We promise

 to offer you a significant warranty on our products that we will unequivocally stand behind.

 •

 SAFE-T-SHIELD

TM

 WARRANTY 

All parts and service are warranteed for one year from date of purchase with the exception of the 

following standard maintenance parts:
 

The Shield (visor)

 

All Filters (Primary Cotton Filter, Secondary Filter, Main Filter Assembly) 

Discontinued parts or components cannot be serviced once the warranty has expired. Additional 3rd party 

sources may be available.

We promise

 to offer you prompt, inexpensive repairs. Products under warranty will be fixed as quickly as 

possible. If it must be returned to our technical center, it will be returned to you without additional shipping 

charges. 

Should your office damage the equipment, due to improper use or inadequate installation or maintenance, 

we’ll still make sure to fix your problem, promptly and without complaint. The warranty will not apply, nor is 

there a warranty for fabric damaged by infection control products.

We promise

 to continuously satisfy you with our products and services. We want to hear from you and help 

you improve your practice.

Sincerely,

The Staff at Ergonomic Products, Inc.

Summary of Contents for Safe-T-Shield





























Reviews: