4
set up
Connect the phone cord and power supply.
If you have a dial-up (analog phone line) Internet
connection or plan to enroll in one for use with
Audrey, plug one end of the included phone cable
into either of the telephone jacks on Audrey’s back
and the other end into your telephone wall jack.
Plug your telephone’s cord into the second phone
jack. Your phone will operate normally when
plugged into Audrey: you will hear it ring and be
able to make and receive calls without interruption.
Place the stylus into the receptacle on top.
3
4
*
Note:
If you have a broadband (cable or DSL)
Internet connection, you will need the following:
• a 3Com USB Ethernet adapter (only 3Com
USB Ethernet adapters are supported)
• a USB cable (included with 3Com USB
Ethernet adapters)
• an Ethernet cable (not included)
The Ethernet cable connects your cable modem,
DSL modem, or Ethernet hub to the adapter and
the USB cable connects the adapter to one of
Audrey's two USB ports.
*
Note:
If placed in the receptacle, the stylus
glows when you have new e-mail.
3
Put the batteries into the back of the keyboard.
Retract Audrey’s stand, pulling it completely
away from the body of the unit.
plug in
Find an installation location for Audrey.
Audrey should be placed near a power
outlet and a phone jack (or near your
Ethernet hub, cable modem, or DSL
modem if you have a broadband
connection). You’ll probably use Audrey
more if you put it in the kitchen, family
room, or the room that is the nerve center
of your home. Audrey can also be mounted
on the wall using the wall-mount bracket
(not included).
1
2
*
Note:
Audrey was not meant for outdoor
use. Using Audrey outdoors risks damage
to its circuitry. Additionally, Audrey should not
be placed where it will be in direct sunlight for
extended periods of time or near sources of
heat (appliances, large light bulbs, heaters, etc.).
9/11 pdf 9/11/00 8:14 PM Page 8