ERBAUER 457MM SCROLL SAW ERB704SSW
HEALTH ADVICE
WARNING!
When drilling, sanding, sawing or grinding, dust particles will be
produced. In some instances, depending on the materials you are working with,
this dust can be particularly harmful to you (e.g. lead from old gloss paint).
You are advised to consider the risks associated with the materials you are working
with and to reduce the risk of exposure. You should:
- Work in a well-ventilated area.
- Work with approved safety equipment, such as those dust masks that are specially
designed to filter microscopic particles.
ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR TOOLS
WARNING!
Do not operate the scroll saw until it is assembled, and you have
read and understood the following instructions and the warning labels on the
scroll saw.
Before operating
- Check for proper assembly and proper alignment of moving parts. Understand the
function and proper use of the ON/OFF switch.
- Understand the function and proper use of the ON/OFF switch.
- Know the condition of the scroll saw. If any part is missing, bent, or does not operate
properly, replace the component before you use the scroll saw.
- Determine the type of work you are going to be doing. Properly protect your body
including your eyes, hands, face, and ears.
- To avoid injury caused by pieces thrown from accessories, use only recommended
accessories designed for this saw. Follow the instructions supplied with the accessory.
The use of improper accessories may cause risk of injury.
- To avoid contact with rotating equipment:
- Do not position your fingers where they could contact the blade if the workpiece
should unexpectedly shift or your hand should slip.
- Do not cut a workpiece too small to be held safely.
- Do not reach under the scroll saw table when the motor is running.
- Do not wear loose clothing or jewelry. Roll long sleeves above the elbow. Tie back
long hair.
- To avoid injury from accidental starting of the scroll saw:
- Make sure the switch is OFF and unplug the power cord from the electric outlet
before changing the blade, performing maintenance or making adjustments.
- Make sure the switch is OFF before plugging in the power cord to an electric outlet.
- To avoid injury from a fire hazard, do not operate the scroll saw near flammable
liquids, vapors or gases.
- To avoid back injury:
- Obtain help when it is necessary to raise the scroll saw more than 10 inches.
Bend your knees when lifting the scroll saw.
- Carry the scroll saw by its base. Do not move the scroll saw by pulling on the power
cord. Pulling on the power cord could cause damage to the insulation or the wire
