Erbauer ERB389JSW, Manual, Page: 7 / 24

710W JIGSAW
ADDITIONAL SAFETY POINTS FOR YOUR JIGSAW
1. Always wear a dust mask.
2. Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring or its own cord.
Cutting accessory
contacting a “live” wire may make exposed metal parts of the
power tool “live” and could give the operator an electric shock.
3.
Use clamps or another practical way to secure and support
the workpiece to a stable platform.
Holding the work by hand
or against your body leaves it unstable and may lead to loss of
control.
4.
Always wear safety glasses or eye shields when using the
jig saw. Everyday eyeglasses have only impact-resistant
lenses; they are NOT safety glasses.
Following this rule will
reduce the risk of serious personal injury.
5.
Always wear hearing protection during extended periods
of operation.
Following this rule will reduce the risk of serious
personal injury.
6.
Keep your hands away from cutting area. Do not reach under
the material being cut because the nearness of the blade to
your hand is hidden from your sight.
7.
Do not use dull or damaged blades. Bent blades can break
easily, or cause kickback.
8. Remove the plug from the socket before carrying out any
adjustment, servicing or maintenance.
9. Fully unwind cable drum extensions to avoid potential
overheating.
10. When an extension cable is required you must ensure it has
the correct ampere rating for your power tool and is in a safe
electrical condition.
11. Ensure your mains supply voltage is the same as indicated on
the rating plate.
12. Your tool is double insulated for additional protection against a
possible electrical insulation failure within the tool.
13. Always check walls, loors and ceilings to avoid hidden power
cables and pipes.
14. After long working period, external metal parts and accessories
could be hot.