Erbauer ERB389JSW, Manual, Page: 19 / 24

710W JIGSAW
ENVIRONMENTAL PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.For
further information visit www.recycle-more.co.uk
PLUG REPLACEMENT
(UK & IRELAND ONLY)
If you need to replace the itted plug then follow
the instructions below.
IMPORTANT
The wires in the mains lead are colored in
accordance with the following code:
BLUE =NEUTRAL
Brown = Live
As the colors of the wires in the mains lead of this
appliance may not correspond with the colored
markings identifying the terminals in your plug,
proceed as follows. The wire which is colored blue
must be connected to the terminal which is marked
with N. The wire which is colored brown must be
connected to the terminal which is marked with L.
Warning:
Never connect live or neutral wires to the
earth terminal of the plug. Only it an approved
13AMP BS1363/A plug and the correct rated
fuse.
Note:
If a moulded plug is itted and has to be
removed take great care in disposing of the plug
and severed cable, it must be destroyed to prevent
engaging into a socket.
13 Amp fuse approved
to BS1362
Connect
Blue to N
(neutral)
Outer sleeve
irmly clamped
Brown L(live)
Cable grip