Erbauer ERB389JSW, Manual, Page: 18 / 24

workpiece and switch on. Press the machine irmly
against the workpiece and plunge the saw blade
slowly into the workpiece.
As soon as the complete surface of the base plate
rests on the work piece, continue to saw along the
cutting line.
(See Fig.11, 12)
METAL CUTTING
Use a iner tooth blade for ferrous metals and a
coarse tooth blade for non-ferrous metals. When
cutting thin sheet metals always clamp wood on
both sides of the sheet to reduce vibration or
tearing of the sheet metal. Both wood and sheet
metal must be cut. Do not force the cutting blade
when cutting thin metal or sheet steel as they
are harder materials and will take longer to cut.
Excessive blade force may reduce the life of the
blade or damage the motor. To reduce heat during
metal cutting, add a little lubricant along the cutting
line.
MAINTENANCE
Remove the plug from the socket before carrying
out any adjustment, servicing or maintenance.
Your power tool requires no additional lubrication
or maintenance. There are no user serviceable
parts in your power tool. Never use water or
chemical cleaners to clean your power tool. Wipe
clean with a dry cloth. Always store your power
tool in a dry place. Keep the motor ventilation
slots clean. Keep all working controls free of
dust. Occasionally you may see sparks through
the ventilation slots. This is normal and will not
damage your power tool.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualiied persons in order to avoid a hazard.
Fig 12
Fig 11