Erbauer ERB389JSW, Manual, Page: 14 / 24

OPERATION INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE:
The machine is intended for sawing wood, plastic,
metal and building materials while resting irmly on
the workpiece. It is suitable for straight and curved
cuts with bevel angles to 45°. The saw blade
recommendations are to be observed.
1.ON/OFF SWITCH
Depress to start and release to stop your tool.
2. SWITCH LOCK-ON BUTTON
Depress on/off switch (1) then lock-on button (2)
(See Fig.1)
, release on/off switch irst then lock-on
button second. Your switch is now locked on for
continuous use. To switch off your tool just depress
and release on/off switch.
3. VARIABLE SPEED CONTROL
Adjust the thumb-wheel to increase or decrease
the speed (See Fig.2)
according to the material,
material thickness and blade speciication to be
used (also possible during no load operation). See
Chart 1 for general guidance on speed selection.
Avoid prolonged use at very low speed as this may
damage your jigsaw’s motor.
Chart 1
Material Speed setting
Wood
5-6
Metal
3-4
Aluminum 3-5
PVC
3-4
Ceramic 3-5
4. HAND GRIP AREAS
Always ensure you maintain a irm grip whilst
operating your jigsaw.
5. BLADE FITTING(See Fig.3, 4, 5)
You can only use the blade type shown in Fig.3.
Fig 1
Fig 2
Fig 4
1 2
4
Fig 3
13