Erbauer 3663602796282, Original Instructions Manual, Page: 14 / 36

14
SEE TECHNICAL SPECIFICATIONS IN THE INSTRUCTION
MANUAL FOR THE VIBRATION LEVELS OF YOUR TOOL.
The declared vibration emission value should be used as a
minimum level and should be used with the current guidance
on vibration.
Calculating the actual period of use can be difficult and the
HSE website has further information.
The declared vibration total value has been measured in
accordance with EN 60745-1 and EN 60745-2-17 and may be
used for compare one tool with another.
The declared vibration total value may also be used in a
preliminary assessment of exposure.
WARNING! The vibration emission during actual
use of the power tool can differ from the declared
total value depending on the ways in which the
tool is used:
• How the materials are grinded, cut or drilled.
• If the tool is in good condition and well maintained.
• Use correct accessory for the tool and ensure it is
sharp and in good condition.
• The tightness of the grip on the handles.
• And the tool is being used as intended by its
design and these instructions.
While working with this power tool, hand/arm
vibrations occur. Adopt the correct working
practices in order to reduce the exposure to
vibration. This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
710W router MNL_EPR710_TPS_GB_V1_V10518_20180606.indd 14 6/6/18 8:40 AM