10
SAFETY WARNINGS FOR ROUTER
c)
The power tool shall not be wet or applied in wet
environment.
d)
The voltage of the power source must agree with the
710W router MNL_EPR710_TPS_GB_V1_V10518_20180606.indd 10
6/6/18 8:40 AM
operation. If damaged, have the power tool repaired before
use.
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained
cutting tools with sharp cutting edges are less likely to bind and
are easier to control.
g) Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account the
working conditions and the work to be performed.
Use of the
power tool for operations different from those intended could
result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free
from oil and grease.
Slippery handles and grasping surfaces do
not allow for safe handling and control of the
tool in unexpected situations.
5) Service
a) Have your power tool serviced by a qualified repair person
using only identical replacement parts.
This will ensure that the
safety of the power tool is maintained.
a) Hold the power tool by insulated gripping surfaces only,
because the cutter may contact its own cord.
Cutting a
"live" wire may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.
b) Use clamps or another practical way to secure and
support the workpiece to a stable platform.
Holding the
work by your hand or against the body leaves it unstable
and may lead to loss of control.
Summary of Contents for 3663602796282
Page 6: ...6 G 3 1 2 4 H I J K 710W router MNL_EPR710_TPS_GB_V1_V10518_20180606 indd 6 6 6 18 8 40 AM ...
Page 34: ......
Page 35: ......
