EN
18
Cutting hazard, even with the cutting tool at standstill!
•
Wear gloves when changing cutting tools.
•
Store saw blade in such manner that nobody will get hurt.
Danger from workpiece kickback!
•
Always work with a properly set riving knife.
•
Do not jam any work pieces.
•
Make sure the saw blade is suitable for the workpiece material.
•
Cut thin or thin-walled workpieces only with finetoothed saw blades.
•
Always use sharp saw blades.
•
If in doubt, check work piece for inclusion of foreign matter (e.g. nails or
screws).
•
Cut only stock of dimensions that can be safely held during cutting.
Entangelement hazard!
•
Ensure that no parts of the body or clothing can be caught and drawn in
by rotating components (no neckties, no gloves, no loose-fitting clothes;
contain long hair with hairnet).
•
Never attempt to cut any workpieces which contain
•
ropes,
•
strings,
•
cords,
•
cables or
•
wires, or to which any of the above are attached.
Hazard generated by insufficient personal protection gear!
•
Wear hearing protection.
•
Wear safety glasses.
•
Wear dust mask.
•
Wear suitable work clothes.
•
When working outdoors wearing of non-slip shoes is recommended.
