EN
27
Assembly
01
Unpacking (Fig. A)
1. Unpack all parts and lay them on a flat, stable surface.
2. Remove all packing materials and shipping devices, if applicable.
3. Remove the protective polyfoam around the motor. Place the table saw body upside
down on the floor. Unlock the bevel locking handle (8) by hand (Fig. A step 1). Turn
the bevel adjusting hand wheel (6) anticlockwise to tilt the motor (Fig. A step 2).
Remove the polyfoam carefully (Fig. A step 3). Lock the bevel locking handle (8)
clockwise.
4. Make sure the delivery contents are complete and free of any damage. If you find
that parts are missing or show damage do not use the product but contact your
dealer. Using an incomplete or damaged product represents a hazard to people
and property.
5. Ensure that you have all the accessories and tools needed for assembly and
operation. This also includes suitable personal protective equipment.
WARNING!
The product must be fully assembled before operation! Do
not use a product that is only partly assembled or assembled with damaged
parts!
IMPORTANT!
Remove the protective foam from around the motor before
use.
Wear protective gloves for this assembly work and always lay the product
on a flat and stable surface while assembling.
Follow the assembly instructions step-by-step and use the pictures provided
as a visual guide to easily assemble the product!
Do not connect the product to power supply before it is completely
assembled!
WARNING!
The product and the packaging are not children’s toys! Children
must not play with plastic bags, sheets and small parts! There is a danger
of choking and suffocation!
