ERA E2000 Instruction Manual Download Page 41

Page: 41 / 56

Selecting a Base

Station

This function allows you to select a base

station

from

those already registered to the handset. You can access

the options by scrolling the menu.

1. Press the

key.

2. Press or key repeatedly to choose

SETTING

menu,

then press the

key.

3. Press

key to choose the

SELECT BS

, press

the

key.

4. You can use

key to select the base you

want, then press the key. If you select a non-

existent base, the handset will sound a warning tone.

5. The display will show

SELECT BS X

. Press the

confirm. A confirm tone will be

heard.

andset

Reset

This function allows you to reset the handset settings to

the factory default.

1. Press the

key.

2. Press

or key repeatedly to choose

SETTING

menu,

then press the

key.

3. Press

key to choose the

HS DEFAULT

menu, press the

key. You will be prompted to

enter the PIN code.

4. Enter the PIN code (the default one is 0000), then press

the

key. If the PIN code is validated all handset

settings will return to the factory default, otherwise a

warning tone will be heard and the settings will

remain.

Result:

After resetting, the handset will return to standby

mode.

MENU/R

Note

The silica gel plug on the rear of the outdoor station is used to prevent the screws from rusting. Remove the silica

gel plug to expose the screws for connecting an optional PSU and/or optional Unlock Module. Replace the plug

once the wires are connected.

110.0

Summary of Contents for E2000

























































Search results

Summary of Contents for E2000

Reviews:

Related manuals for E2000

Brands by name

Popular brands

ERA E2000, Instruction Manual

Search results

Summary of Contents for E2000

Reviews:

Related manuals for E2000

Brands by name

Popular brands