ERA E2000 Instruction Manual Download Page 34

Page: 34 / 56

Last Number Redial

1. Press the

key in standby mode.

Result:

The LCD displays the last number you dialed.

2. Press the

key to dial out the number.

Your phone allows you to retrieve the last 10

numbers you have dialed and recall them quickly.

Search for and dial a number in Redial Book

1. Press the

key in standby mode.

2. If you want to scroll through the memor y, press

key repeatedly until you find the

number you want to dial.

3. Press the

key to dial out the number.

Use Redial Book options

Using the redial book options, you can add a number
to phone book or delete a number in the redial book .

1. Press the

key.

2 . S c ro l l to t h e d e s i re d n u m b e r b y u s i n g t h e

key.

3. When the number appears on the display, press th

key to choose the desired option:

Notes

If no numbers are found,

"EMPTY"

is displayed.

When the redial book is full, each time you dial a

new number, the oldest number stored in the redial
book is automatically erased.

MENU/R

Adding Phone book Entries

1. Press the

key.

2. Press the

to choose

press

key

PHONE BOOK

the key.

3. Press

key again to choose

ADD ENTRY

4. The display shows

"NAME ?".

Enter the name you

want to use, then press the

key to confirm. The

display shows

"NUMBER ?".

Enter the desired

number (up to 20 digits), press the

key.

5.*Use or key to select the ring you like to

associate with the number, press the key to

confirm.

6. Repeat if necessary.

Note:

If you make a mistake while entering a name or a

number, use the

key to correct it. Each time

you press the key, the last character or digit is

deleted.

Using a Pause

A pause is useful when you access an interactive voice

response system, such as an automated banking system.

A pause provides a delay of 3 seconds. If you want to

insert a pause when you dial a number in standby mode

or store a number in memory, press the

key. The

letter

will appear at the pause entry.

Viewing Phone book Entries

1. In the standby mode, press the

key.

2. Press

key repeatedly until the desired name

is displayed.

3. Press the

key to show the relevant number.

* If you want to set a VIP number, you

can

select a

special ring tone for it. The ring tone should be

different from the external ring you have set. You can

set up to 9 VIP ring tones associate with 9 VIP

numbers/groups.

MENU/R

Summary of Contents for E2000

























































Search results

Summary of Contents for E2000

Reviews:

Related manuals for E2000

Brands by name

Popular brands

ERA E2000, Instruction Manual

Search results

Summary of Contents for E2000

Reviews:

Related manuals for E2000

Brands by name

Popular brands