ERA E2000 Instruction Manual Download Page 11

Page: 11 / 56

Redial key

Enter the redial book, as described

n page 20.

Insert a pause when pre-dialing a number.

Menu/OK key (left)

Enter the menu functions in standby mode.
Confirm selections & actions.

Performs "Flash" function.

Cancel/Mute key (right)

Return to the previous menu.
Enter to mute during a call.
Delete an incorrect character/digit.

Press and hold to turn on/off keypad lock function.

Set up a conference call, as described in page 41.

Key Description

(continued)

MENU/R

Register

button

(underneath grommet)

Call

button

Part Two:

Outdoor Station

1. To register

Your Outdoor Station is already registered to the Base Station and is named number 2.

If you need to re-register the Outdoor Station to the Base Station follow the below instructions:

Hold the key on the bottom of the Baste Station for 5 seconds or longer, and then release. Press the

Call

button on

the Outdoor Station, then using a paper clip or similar object, press the

Register

button (underneath the grommet) on

the back of the Outdoor Station for 5 seconds or longer, until you hear the prompt tone confirming the registration to

the Base Station. Remember to replace the grommet covering the register button.

If you cannot register the Outdoor Station to the Base Station, disconnect the power supply from the Base Station and

remove the batteries from the Outdoor Station for 5 minutes, then try again.

Summary of Contents for E2000

























































Search results

Summary of Contents for E2000

Reviews:

Related manuals for E2000

Brands by name

Popular brands

ERA E2000, Instruction Manual

Search results

Summary of Contents for E2000

Reviews:

Related manuals for E2000

Brands by name

Popular brands