ERA E2000 Instruction Manual Download Page 14

Page: 14 / 56

Calling with more than one Handset

If you have more than one handset registered to the

same base

station

, you can make internal calls and

transfer an external call between the registered handsets.

Making an internal call

1. Press the

key, the LCD displays as follows, then

input the number of the handset you want to call.

2. If the handset entered is valid, the called handset will

ring and display

HSX CALLING

The handset user

can press the

key to answer the internal call.

3. At the end of your conversation, press the

key.

Call transfer between handsets

You can transfer an external call between the handsets

are registered to the same base

station

1. During an external call, press the

key then input

the number of the handset you want to transfer the

call to.

2. If the called party can answer your call,

they

can press

the

key to talk with you. At this time you can

inform him/her of the incoming call.

3. When the called party answers, press the

key or

replace the handset to the base

station

to complete

the transfer.

Note

During the internal call, if an external call comes in,
the LCD will show the caller's number. You should
press the

key to end the internal call first then

press the

key to answer the call.

1 2 3 4 5

Battery Installation (continued)

Slide the battery cover downwards in the direction of the

arrow and remove.

Insert batteries as indicated, matching correct polarity (+,-).

Install the two C size batteries supplied into the battery

compartment before fixing the Outdoor Station in position.

Outdoor Station

3. Replace the battery cover by sliding in an

upwards direction until it snaps in place.

Reversing the orientation may damage the

unit.

When replacing the batteries, always use

good quality C size alkaline batteries.

You do not need to connect the DC

positive input and negative input, if

powering by batteries.

Notes

Summary of Contents for E2000

























































Search results

Summary of Contents for E2000

Reviews:

Related manuals for E2000

Brands by name

Popular brands

ERA E2000, Instruction Manual

Search results

Summary of Contents for E2000

Reviews:

Related manuals for E2000

Brands by name

Popular brands