ERA E2000 Instruction Manual Download Page 38

Page: 38 / 56

Making a Call

You can enter the desired phone number in standby

mode, which allows you to make corrections before

dialing. Follow these steps:

1. Enter a telephone number (up to 32 digits). Check

it. You can also use the

key to insert a pause.

1. Pick up the handset and press the

key.

Result:

The

icon appears on the LCD.

2. Dial a telephone number.

3. To end the call, either press the

key or

replace the handset on the base.

Basic Functions

Note

To make a call to the last number you dialed,

use the

Redial

feature. For details, see page

20.

Note

If you make a mistake while entering a number,

press the

key to clear the last digit.

2. When the number appears correctly, press the

key.

All descriptions in this manual assume that the handset is in standby mode.

To s

et the telephone to standby mode press

the

key.

Part One:

Telephone Handset

andset (HS)

Setting

Alarm

Notification

You are able to set the alarm on the handset and adjust

the alarm settings.

1. Press the

key.

2. Press or key repeatedly to choose

SETTING

menu,

then press the

key.

3. Press the

key again to choose

ALARM

4. The display shows the current set. Use the

key to select

OFF

press the

key.

5. If you select

the display indicates you to enter

the time in

format.

6. Press the

key, a beep sounds and the display

shows

SNOOZE ON/OFF,

you can press or

key to enable or disable the snooze function

on the alarm and press the

key.

7. When the alarm sounds, press any key to switch it

off.

Notes

At step 5 you need to enter the time in 24-Hour

format.

If you press any key at the right time the alarm to

ring, the alarm will be silent.

If you choose

SNOOZE ON

, the alarm will ring at

regular intervals of 10 minutes.

MENU/R

Summary of Contents for E2000

























































Search results

Summary of Contents for E2000

Reviews:

Related manuals for E2000

Brands by name

Popular brands

ERA E2000, Instruction Manual

Search results

Summary of Contents for E2000

Reviews:

Related manuals for E2000

Brands by name

Popular brands