ERA COMFORT 4, Operation Instruction Manual, Page: 7 / 32

EN
ERA
(pic. 11)
• remove the decorative front panel
• hold the power wire through the cable hole 1 in
the case
• strip the insulation on 5-7 mm from the wire end
• insert wires into terminal box X and press them
by tap screw
• fix the wires by means of cable clamp 2
• combine clamps of the decorative panel with
grooves in the case
• fix the panel with screw
ERA Option -02 (pic. 12)
• remove the decorative front panel
• install S3 switch to the fan case
• connect the wires by inserting the tip pins 3
to the switch S3
• hold the power wire through the cable hole 1
in the case
• strip the insulation on 5-7 mm from the wire
end
• insert wires into terminal box X and press them
by tap screw
• fix the wires by means of cable clamp 2
• combine clamps of the decorative panel with
grooves in the case
• fix the panel with screw
EURO (pic. 13-14)
• remove the decorative front panel
• hold the power wire through the cable hole 1 in the case
• strip the insulation on 5-7 mm from the wire end
• insert wires into terminal box X and press them by tap screw
• fix the wires by means of cable clamp 2
• combine clamps of the decorative panel with grooves in the case
• fix the panel with screw
Pic.11 ERA
Pic.11 EURO
Pic.12 ERA Option -02
Pic.12 EURO Option -02
Pic. 8. E Option -02 Pic. 7. Option MRe Pic. 6. E/NEO
Pic. 9. QUADRO Pic. 10. QUADRO-02
1
2
1
2
2 1
3
3
2
1
1 2 1 2
X
S3
1
3
3
2