ERA COMFORT 4, Operation Instruction Manual, Page: 6 / 32

EN
DISC (
pic
. 2)
• remove the decorative front panel, turning
counterclockwise
• hold the power wire through the cable hole 1 in
the case
• strip the insulation on 5-7 mm from the wire end
• insert wires into terminal box X and press them
by tap screw
• fix the wires by means of cable clamp 2
• combine clamps of the decorative panel with
• grooves in the case and fix by rotation of the panel
relative to the case clockwise until the matching
of the borders
FLOW (
pic
. 3)
•
remove the decorative grill;
• remove the protective cover;
• hold the power wire through the cable hole 1 in the
case;
• strip the insulation on 7-8 mm from the wire end
• insert wires into terminal box X and press them by tap
screw
• fix the wires by means of cable clamp
2
• install the protective cover;
• install the grill.
PROFIT (
pic
. 3-5)
• remove the protective cover;
• hold the power wire through the cable
hole 1 in the case;
• strip the insulation on 7-8 mm from
the wire end
• insert wires into terminal box X and
press them by tap screw
• fix the wires by means of cable clamp 2
• install the protective cover;
Fans of PROFITseries have different diameters of inlet and outlet pipes for the
connection of diffusers with the flange of the corresponding diameter from absorption
and air ducts from air side discharge.
• Install a duct fan;
• From absorption, accession of air ducts to the fan is possible through fittings of a
necessary form and diameter or a decorative grill with a flange.
E/NEO/QUADRO
(pic. 6-10)
• remove the decorative front panel
• hold the power wire through the cable hole 1 in the case
• strip the insulation on 5-7 mm from the wire end
• insert wires into terminal box X and press them by tap screw
• fix the wires by means of cable clamp 2
• combine clamps of the decorative panel with grooves in the case
• fix the panel with screw
x
Pic.2 DISC
Pic.3 FLOW/PROFIT
Pic
.5 PROFIT
Pic
.4 PROFIT
airvent
fun
airvent
airvent
fun
duct
connection
2
1
combine
to turn