20
EN
Anomaly
Possible causes
Remedies
A smell of smoke is in the
environment.
The stove stops.
Combustion is bad.
Contact after-sales service
The smoke extractor works badly.
The smoke duct is poorly installed.
The smoke duct is blocked.
The stove always works at maximum
power
The room thermostat is in maximum
position.
Set the thermostat temperature again
The temperature detection probe is
defective.
Check the operation of the probe and have it replaced if
necessary
The control panel is faulty.
Check the control panel and have it replaced if necessary
It is forbidden to modify the safety devices. It is only after having eliminated the cause of the security inter-
vention that it is possible to light the stove again, thus restoring the operation.
See the chapter on alarms to understand how to interpret each alarm if it appears on the screen of the stove.
All repairs must be carried out exclusively by a specialized technician with the extinct stove and the dis-
connected electrical outlet. Any unauthorized modification of the device and the replacement of parts with
non -original parts is prohibited.
Never turn off the stove by cutting the electricity. Always leave the stop phase to avoid damage to the device
and problems during subsequent tension.
Any issue due to non-compliance with the rules indicated in this manual would call into question the validity
of the guarantee and the seller's responsibility. Any intervention by the technical assistance center will be
paid by the applicant if these instructions are not respected.