FRAME
22
Parking jack lowered and raised position
8. Attach a safety chain to the tractor drawbar. Ensure there is enough slack in the chain
to allow the air cart to turn.
9. Connect the electronics of the Air Cart to the tractor.
HITCHING TO THE SEEDING IMPLEMENT
NOTE:
The below procedure refers to the tow-between Air Cart.
1. With the Air Cart connected to the tractor back the cart into position, aligning the
seeding implement hitch with that of the air cart.
2. Attach the implement hitch to the Air Cart using the correct pin.
3. Connect the safety chain to the tow bar.
4. Connect the hydraulics of the seeding implement to the remote hydraulic supply on
the Air Cart.
5. Connect any electrical harnesses from the seeding implement to the Air Cart.
NOTE:
The height of the tow bar cannot be adjusted; however minor adjustment can be
achieved by lifting or lowering the tow eye at the front of the air cart.
Summary of Contents for AIR CART
