Quadro Manual I: Installation Guide
Step 2.3: Comprehensive Configuration
Quadro2x, 2xi, Quadro4x, 4xi, 4xa, 4xia, 4xs, 4xis, Quadro16x, 16xi, 16xa, 16xia, 16xs, 16xis; (SW Version 3.0.x)
32
stream
fields
.
The default entry in both fields is
10000,
the maximum bandwidth of the 10
MB uplink module.
For basic DSL and cable modem service in the US, typical values are
300
for Upstream and
1500
for Downstream.
The
Min Data Rate
text field is used to specify the amount of bandwidth reserved for data
applications. The value entered here needs to be smaller that the value specified for
Up-
stream Bandwidth
. Specify the
WAN Interface Protocol
by choosing between
PPPoE
(Point to Point over Ethernet) and
Ethernet
. Use Ethernet for DHCP or static IP.
Clicking
Next
shows the
WAN IP Configuration
page
.
If
PPPoE
is the selected WAN In-
terface Protocol
,
the next page will be
PPP Configuration.
WAN IP Configuration
Your Internet Service Provider (ISP) should provide this information.
•
Assign automatically via DHCP
- The parameters are set automatically by the ISP.
This is common with cable modem and DSL service.
•
Assign Manually
requires the administrator to enter the external
IP Address
, the cor-
responding
Subnet Mask
, and the IP address of the
Standard Gateway
. This is
common when you have a static IP address with your ISP.
Fig. I-35: WAN IP Configuration page
Click the
Next
button to display the
WAN Interface Configuration
page.
Summary of Contents for Quadro 16xa
Page 1: ......
